Komatsu water pump
- Interchanges
- 6202-63-1200 · J351-0009C
- Engine
- Komatsu 4D95S
Photos of the actual unit — the same pump we measure and pack.
6140-60-1110 is how Komatsu lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 6130-62-1200, 6131-62-1240.
This pump was designed for 4D105-3; D50-17/18; 510.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 6140-60-1110 |
| Fits brand | Komatsu |
| TO Belt pulley height | 99 |
| TO Shaft head height | 143.5 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | ZG1-2 |
| Belt pulley thread | 6-M8X1.25 |
| TO Impeller height Ⅰ | 20.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 11.73 kg |
| Packing | 2 pcs/ctn, 25.50 kg gross |
Depending on the catalog you use, the same pump shows up as:
Logistics data: 2 pcs/ctn, 25.50 kg gross, 56 x 44 x 20 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 6140-60-1110 fit?
6140-60-1110 fits 4D105-3, D50-17/18 and other listed engines. It is a Komatsu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 6140-60-1110?
6140-60-1110 interchanges with 6130-62-1200, 6131-62-1240. All of these refer to the same water pump assembly.
How much does the 6140-60-1110 water pump weigh?
One pump weighs 11.73 kg net. A full carton of 2 pieces comes to 25.50 kg gross.
What should I check before replacing the 6140-60-1110 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.