Komatsu water pump
- Interchanges
- 6205-61-1202 · 6206-61-1100 +2
- Engine
- S6D95
Photos of the actual unit — the same pump we measure and pack.
The OE number 6240-61-1105 identifies a water pump fitted to 6D170 engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 18.96 kg; a full carton holds 1.
This pump was designed for 6D170.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 6240-61-1105 |
| Fits brand | Komatsu |
| TO Shaft head height | 74 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 6-M12X1.75 |
| TO Gear height | 72 |
| TO Impeller height Ⅰ | 8.4 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 31 |
| Net weight | 18.96 kg |
| Packing | 1 pcs/ctn, 21.00 kg gross |
Packing runs 1 pumps per carton, 21.00 kg gross weight, carton size 41 x 31 x 27 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 6240-61-1105 fit?
6240-61-1105 fits 6D170 engines. It is a Komatsu application water pump, and our aftermarket unit replaces it directly.
How much does the 6240-61-1105 water pump weigh?
One pump weighs 18.96 kg net. A full carton of 1 piece comes to 21.00 kg gross.
What should I check before replacing the 6240-61-1105 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 6240-61-1105 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.