Cummins water pump
- Interchanges
- 3286277 · 3286278 +5
- Engine
- 6BT
Photos of the actual unit — the same pump we measure and pack.
6741-61-1530 is how Cummins lists this water pump. The same pump shows up as 3357458, 3966841, 4934058, 6742-01-5038 in other catalogs.
This pump was designed for 6CT; 6C9-11; 6CTA 8.3; 6D114; Komatsu 360-7.
If your engine tag matches any entry above, this pump is the right replacement.
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
| Parameter | Value |
|---|---|
| OE number | 6741-61-1530 |
| Fits brand | Cummins |
| TO Belt pulley height | 90.3 |
| TO Impeller height Ⅱ | 34.5 |
| TO Shaft head height | 110.3 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O115X3.5 |
| Net weight | 3.34 kg |
| Packing | 4 pcs/ctn, 15.36 kg gross |
Logistics data: 4 pcs/ctn, 15.36 kg gross, 41 x 36 x 19.5 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 6741-61-1530 fit?
6741-61-1530 fits 6CT, 6C9-11 and other listed engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 6741-61-1530?
6741-61-1530 interchanges with 3357458, 3966841, 4934058, 6742-01-5038. All of these refer to the same water pump assembly.
How much does the 6741-61-1530 water pump weigh?
One pump weighs 3.34 kg net. A full carton of 4 pieces comes to 15.36 kg gross.
What should I check before replacing the 6741-61-1530 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.