Photos of the actual unit — the same pump we measure and pack.
7.322.682 Water Pump — Chevrolet; Clark; Hyster Replacement
7.322.682 belongs to the Chevrolet; Clark; Hyster cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 52.258.899.
Which engines use the 7.322.682 water pump?
Fitment covers Opala; Caravan; Comodoro; Diplomata 2.5; A20/D20 4.1.
If your engine tag matches any entry above, this pump is the right replacement.
What part numbers interchange with 7.322.682?
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
What are the specifications of 7.322.682?
| Parameter | Value |
|---|---|
| OE number | 7.322.682 |
| Fits brand | Chevrolet; Clark; Hyster |
| TO Shaft head height | 105.7 |
| Mounting hole position | Aligned to OE mounting points |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 16 |
| Flange Diameter | 58 |
| Impeller Diameter | 88.5 |
| TO Flange height | 96.7 |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
Packing and quality checks
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
Frequently asked questions
What vehicles or engines does 7.322.682 fit?
7.322.682 fits Opala, Caravan and other listed engines. It is a Chevrolet; Clark; Hyster application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 7.322.682?
7.322.682 interchanges with 52.258.899. All of these refer to the same water pump assembly.
What should I check before replacing the 7.322.682 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 7.322.682 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The same four checks, every unit
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
Price this pump
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
- Sales desksales@hanchitradecn.com
- Trade deskBased in China, shipping worldwide
- Working hoursMon – Sat, 08:30 – 18:00 (GMT+8)
What comes back with the quote
- Unit price for OE 7.322.682 and any mixed items
- MOQ, carton data and container loading plan
- Photos of the actual unit before packing
- Lead time and suggested shipping method
Email us about OE 7.322.682
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.
- OE number(s) — a plain list is fine
- Quantity per item
- Destination port or country
- Packing, branding or target-price notes