Yanmar water pump
- Interchanges
- 113-03-0282 · 129900-42001 +7
- Engine
- WITHOUT PIPE
Photos of the actual unit — the same pump we measure and pack.
729428-42003 is how Yanmar; John Deere lists this water pump. The same pump shows up as 129002-42004, 729428-42004, AM878201, AM879651, AM880905 in other catalogs.
This pump was designed for 4TNE88T; PC40-7; 4D84.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 729428-42003 |
| Fits brand | Yanmar; John Deere |
| TO Shaft head height | 126.4 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M6X1 |
| TO Flange height | 124.9 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 1.30 kg |
| Packing | 8 pcs/ctn, 13.00 kg gross |
Depending on the catalog you use, the same pump shows up as:
Each pump is packed individually; a master carton holds 8 pieces at 13.00 kg gross.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 729428-42003 fit?
729428-42003 fits 4TNE88T, PC40-7 and other listed engines. It is a Yanmar; John Deere application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 729428-42003?
729428-42003 interchanges with 129002-42004, 729428-42004, AM878201, AM879651, AM880905. All of these refer to the same water pump assembly.
How much does the 729428-42003 water pump weigh?
One pump weighs 1.30 kg net. A full carton of 8 pieces comes to 13.00 kg gross.
What should I check before replacing the 729428-42003 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.