Volvo water pump
- Interchanges
- 21874318 · 7005604000 +1
- Engine
- For EC480D
Photos of the actual unit — the same pump we measure and pack.
7421072412 belongs to the Volvo cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 20920065, 21284318, 21648711, 21814005, 21814040 and 9 more.
This pump was designed for RENAULT TRUCK; VOLVO BUS; VOLVO TRUCK.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 7421072412 |
| Fits brand | Volvo |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 1.3 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 5.00 kg |
| Packing | 2 pcs/ctn, 13.00 kg gross |
Depending on the catalog you use, the same pump shows up as:
For shipping estimates, count on 2 pumps per carton (13.00 kg, 51.5 x 29 x 26 cm).
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 7421072412 fit?
7421072412 fits RENAULT TRUCK, VOLVO BUS and other listed engines. It is a Volvo application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 7421072412?
7421072412 interchanges with 20920065, 21284318, 21648711, 21814005, 21814040, 21960481 and 8 more. All of these refer to the same water pump assembly.
How much does the 7421072412 water pump weigh?
One pump weighs 5.00 kg net. A full carton of 2 pieces comes to 13.00 kg gross.
What should I check before replacing the 7421072412 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.