Kubota water pump
- Interchanges
- 15521-73030 · 15521-73030-18 +10
- Engine
- Carrier
Photos of the actual unit — the same pump we measure and pack.
7509-10103 is the Kubota OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
Fitment covers Carrier; V2203E; V1702; V1903; D1302; D1402; D1403; D1703; BOBCAT 753/763/773.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 7509-10103 |
| Fits brand | Kubota |
| TO Impeller height Ⅱ | 21.8 |
| TO Shaft head height | 84.8 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | M6X1 |
| TO Flange height | 82.1 |
| Flange jumping | 0.07 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 1.20 kg |
| Packing | 6 pcs/ctn, 9.20 kg gross |
Depending on the catalog you use, the same pump shows up as:
For shipping estimates, count on 6 pumps per carton (9.20 kg, 56 x 34 x 31 cm).
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 7509-10103 fit?
7509-10103 fits Carrier, V2203E and other listed engines. It is a Kubota application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 7509-10103?
7509-10103 interchanges with 15521-73030, 15521-73030-18, 15521-73033, 15521-73034, 15521-73035, 15521-73039 and 6 more. All of these refer to the same water pump assembly.
How much does the 7509-10103 water pump weigh?
One pump weighs 1.20 kg net. A full carton of 6 pieces comes to 9.20 kg gross.
What should I check before replacing the 7509-10103 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.