Isuzu water pump
- Interchanges
- 1-87310835-0 · 1-87310902-0 +4
- Engine
- 6HH1 NEW 6HE1
Photos of the actual unit — the same pump we measure and pack.
8-13617-801 belongs to the Isuzu cooling system parts family. The pump sits on 4BB1, 2800cc and other listed engines. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 5-13610-012, 5-13610-027-2, 5-13610-041, 8-94376-865, 9-13617-636.
This pump was designed for 4BB1; 2800cc; ELF 250/350; JOURNEY; 4BA1; 3600cc; KS21.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 8-13617-801 |
| Fits brand | Isuzu |
| TO Shaft head height | 120.4 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 112.2 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 4.96 kg |
| Packing | 4 pcs/ctn, 21.44 kg gross |
One pump, many part numbers. The full cross list:
For shipping estimates, count on 4 pumps per carton (21.44 kg, 58 x 44 x 21 cm).
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 8-13617-801 fit?
8-13617-801 fits 4BB1, 2800cc and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 8-13617-801?
8-13617-801 interchanges with 5-13610-012, 5-13610-027-2, 5-13610-041, 8-94376-865, 9-13617-636. All of these refer to the same water pump assembly.
How much does the 8-13617-801 water pump weigh?
One pump weighs 4.96 kg net. A full carton of 4 pieces comes to 21.44 kg gross.
What should I check before replacing the 8-13617-801 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.