Isuzu water pump
- Interchanges
- 1-13610-877-0 · 1-13610190-0
- Engine
- 6BD1 6 HOLES EX200
Photos of the actual unit — the same pump we measure and pack.
8-97018556 is how Isuzu lists this water pump. The same pump shows up as 5-13610184, 8-94379924, 8-94439-851-0, 8-94439850, 8-97021171 in other catalogs.
The OE application list reads: 4BD1 NEW; ELF 250; 2800cc 4BA1; 4BC1; 3300cc 4BC2.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 8-97018556 |
| Fits brand | Isuzu |
| TO Shaft head height | 150 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | ZG3/8 |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 139.3 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.3 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 4.90 kg |
| Packing | 4 pcs/ctn, 21.20 kg gross |
Depending on the catalog you use, the same pump shows up as:
Packing runs 4 pumps per carton, 21.20 kg gross weight, carton size 58 x 44 x 21 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 8-97018556 fit?
8-97018556 fits 4BD1 NEW, ELF 250 and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 8-97018556?
8-97018556 interchanges with 5-13610184, 8-94379924, 8-94439-851-0, 8-94439850, 8-97021171. All of these refer to the same water pump assembly.
How much does the 8-97018556 water pump weigh?
One pump weighs 4.90 kg net. A full carton of 4 pieces comes to 21.20 kg gross.
What should I check before replacing the 8-97018556 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.