Isuzu water pump
- Interchanges
- 8-97254-148-1 · 8-98098662-0 +1
- Engine
- 4LE1
Photos of the actual unit — the same pump we measure and pack.
Looking for 8-97062-796-0? It is the Isuzu OE reference for a cooling water pump. The replacement we supply keeps the OE fit and pulley dimensions. Net weight 1.32 kg, packed 8 per carton.
You will find this pump on 4JB1 M6; 4JR1; 2500cc 4JR1; 2800cc; 4JA1; GWIS-25A; SK60.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 8-97062-796-0 |
| Fits brand | Isuzu |
| TO Impeller height Ⅱ | 16 |
| TO Shaft head height | 94 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 8-M6X1 |
| TO Flange height | 78.9 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 1.32 kg |
| Packing | 8 pcs/ctn, 12.56 kg gross |
Each pump is packed individually; a master carton holds 8 pieces at 12.56 kg gross.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 8-97062-796-0 fit?
8-97062-796-0 fits 4JB1 M6, 4JR1 and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 8-97062-796-0?
8-97062-796-0 interchanges with 8-94140-341-0, 8-94140-341-2, 8-94310-251-0, 8-94376-844-0, 8-94379-422-0, 8-94379-472-0 and 6 more. All of these refer to the same water pump assembly.
How much does the 8-97062-796-0 water pump weigh?
One pump weighs 1.32 kg net. A full carton of 8 pieces comes to 12.56 kg gross.
What should I check before replacing the 8-97062-796-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.