Isuzu water pump
- Interchanges
- 5-13610-184-0 · 5-13610-184-1 +9
- Engine
- 3300cc 4BC2
Photos of the actual unit — the same pump we measure and pack.
8-97363-478-0 is the Isuzu OE reference for this cooling water pump. One pump weighs 1.82 kg net; match the number against your old pump or parts book before ordering.
This pump was designed for 4300cc 4HF1; 4600cc 4HG1; 4800cc 4HE1T; 5000cc 4HJ1.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 8-97363-478-0 |
| Fits brand | Isuzu |
| TO Impeller height Ⅱ | 8.3 |
| TO Shaft head height | 93.8 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 80.2 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 1.82 kg |
| Packing | 4 pcs/ctn, 9.50 kg gross |
One pump, many part numbers. The full cross list:
For shipping estimates, count on 4 pumps per carton (9.50 kg, 46 x 40 x 21 cm).
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 8-97363-478-0 fit?
8-97363-478-0 fits 4300cc 4HF1, 4600cc 4HG1 and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 8-97363-478-0?
8-97363-478-0 interchanges with 8-944939-850-0, 8-944939-850-2, 8-97073-951-Z, 8-97109-676-Z, GWIS-42A. All of these refer to the same water pump assembly.
How much does the 8-97363-478-0 water pump weigh?
One pump weighs 1.82 kg net. A full carton of 4 pieces comes to 9.50 kg gross.
What should I check before replacing the 8-97363-478-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.