Isuzu water pump
- Interchanges
- 8-944939-850-2 · 8-97073-951-Z +3
- Engine
- 4300cc 4HF1
Photos of the actual unit — the same pump we measure and pack.
8-97602-775-0 is how Isuzu lists this water pump. The same pump shows up as 8-97602-773-0, 8-97627-355-0 in other catalogs.
Fitment covers 6HE1 two belt; FRR/FTR; ALUMINUM.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 8-97602-775-0 |
| Fits brand | Isuzu |
| TO Belt pulley height | 95.8 |
| TO Impeller height Ⅱ | 4.6 |
| TO Shaft head height | 116.7 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | 4-M8X1.25 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O52X3.5 |
| Net weight | 4.42 kg |
| Packing | 4 pcs/ctn, 19.26 kg gross |
Logistics data: 4 pcs/ctn, 19.26 kg gross, 58 x 44 x 21 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 8-97602-775-0 fit?
8-97602-775-0 fits 6HE1 two belt, FRR/FTR and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 8-97602-775-0?
8-97602-775-0 interchanges with 8-97602-773-0, 8-97627-355-0. All of these refer to the same water pump assembly.
How much does the 8-97602-775-0 water pump weigh?
One pump weighs 4.42 kg net. A full carton of 4 pieces comes to 19.26 kg gross.
What should I check before replacing the 8-97602-775-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.