Isuzu water pump
- Interchanges
- 8-97602781-0
- Engine
- 6HE1 4 SLOTS ROCKY
Photos of the actual unit — the same pump we measure and pack.
The OE number 8-97602783-0 identifies a water pump fitted to 6HE1 and 3PK engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 6.80 kg; a full carton holds 2.
The OE application list reads: 6HE1; 3PK.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 8-97602783-0 |
| Fits brand | Isuzu |
| TO Belt pulley height | 115.6 |
| TO Shaft head height | 134.5 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| Impeller Diameter | 100 |
| Pulley Diameter | 153 |
| Belt pulley thread | 4-M8 |
| TO Impeller height Ⅰ | 6.5 |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 6.80 kg |
| Packing | 2 pcs/ctn, 16.00 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
For shipping estimates, count on 2 pumps per carton (16.00 kg, 43.5 x 30 x 21 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 8-97602783-0 fit?
8-97602783-0 fits 6HE1 and 3PK engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 8-97602783-0?
8-97602783-0 interchanges with 8-97602782-0. All of these refer to the same water pump assembly.
How much does the 8-97602783-0 water pump weigh?
One pump weighs 6.80 kg net. A full carton of 2 pieces comes to 16.00 kg gross.
What should I check before replacing the 8-97602783-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.