Isuzu water pump
- Interchanges
- 8970693870 · J211-0600S
- Engine
- 3KC1
Photos of the actual unit — the same pump we measure and pack.
Looking for 8-98038-607-0? It is the Isuzu OE reference for a cooling water pump. The replacement we supply keeps the OE fit and pulley dimensions. Net weight 7.30 kg, packed 2 per carton.
You will find this pump on 6BG1 T1.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 8-98038-607-0 |
| Fits brand | Isuzu |
| TO Shaft head height | 160.5 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 149.4 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.5 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 7.30 kg |
| Packing | 2 pcs/ctn, 16.90 kg gross |
Logistics data: 2 pcs/ctn, 16.90 kg gross, 43.5 x 30 x 21 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 8-98038-607-0 fit?
8-98038-607-0 fits 6BG1 T1 engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
How much does the 8-98038-607-0 water pump weigh?
One pump weighs 7.30 kg net. A full carton of 2 pieces comes to 16.90 kg gross.
What should I check before replacing the 8-98038-607-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 8-98038-607-0 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.