Mercedes Benz water pump
- Interchanges
- 366 200 0401 · 366 200 0701 +2
- Engine
- OM 366/A/LA
Photos of the actual unit — the same pump we measure and pack.
If your parts book shows 904 200 2601, you need a water pump for MERCEDES ATEGO EVO BUS, ME006/VBD904/EHME127 and other listed engines. Ours is a matching replacement — same mounting holes, same belt pulley height, pressure-tested before packing. Related OE numbers include 904 200 0401, 904 200 0801, 904 200 2001, 904 200 2201, 904 200 2801 and 3 more.
Fitment covers MERCEDES ATEGO EVO BUS; ME006/VBD904/EHME127; OM 904/906 LA.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 904 200 2601 |
| Fits brand | Mercedes Benz |
| TO Shaft head height | 122 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M8X1.25 |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 113 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 5 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 9.40 kg |
| Packing | 2 pcs/ctn, 21.00 kg gross |
Depending on the catalog you use, the same pump shows up as:
Packing runs 2 pumps per carton, 21.00 kg gross weight, carton size 56 x 44 x 20 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 904 200 2601 fit?
904 200 2601 fits MERCEDES ATEGO EVO BUS, ME006/VBD904/EHME127 and other listed engines. It is a Mercedes Benz application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 904 200 2601?
904 200 2601 interchanges with 904 200 0401, 904 200 0801, 904 200 2001, 904 200 2201, 904 200 2801, 904 200 4301 and 2 more. All of these refer to the same water pump assembly.
How much does the 904 200 2601 water pump weigh?
One pump weighs 9.40 kg net. A full carton of 2 pieces comes to 21.00 kg gross.
What should I check before replacing the 904 200 2601 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.