Massey Ferguson water pump
- Interchanges
- 02/100066 · 3118125R91 +12
- Engine
- D-550/E-35/E-60/E-70/E-90
Photos of the actual unit — the same pump we measure and pack.
999091 is how Massey Ferguson; Perkins; Case; JCB lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 02/100066, 3118125R91, 41312143, 41312323, 41312551 and 6 more.
Our data for 999091 does not list the engine models this pump serves. The reliable check is the OE number itself: match 999091 against the number on your old pump or in the parts book, then compare the dimensions in the spec table below.
| Parameter | Value |
|---|---|
| OE number | 999091 |
| Fits brand | Massey Ferguson; Perkins; Case; JCB |
| TO Belt pulley height | 109.4 |
| TO Shaft head height | 115.7 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | 4-5/16-24 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| TO Impeller height Ⅰ | 27 |
| Net weight | 4.00 kg |
| Packing | 4 pcs/ctn, 18.50 kg gross |
Depending on the catalog you use, the same pump shows up as:
Packing runs 4 pumps per carton, 18.50 kg gross weight, carton size 41 x 36 x 19.5 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
How do I know 999091 is the right pump?
Match 999091 against the OE number on your old pump or in the parts book, then compare the dimensions in the spec table on this page. Our data does not list engine models for this number.
What other part numbers replace 999091?
999091 interchanges with 02/100066, 3118125R91, 41312143, 41312323, 41312551, 41312915 and 5 more. All of these refer to the same water pump assembly.
How much does the 999091 water pump weigh?
One pump weighs 4.00 kg net. A full carton of 4 pieces comes to 18.50 kg gross.
What should I check before replacing the 999091 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.