Deutz water pump
- Interchanges
- 02931946 · 04198531
- Engine
- BF4M2012
Photos of the actual unit — the same pump we measure and pack.
04162752 belongs to the DEUTZ cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 04166383.
Our data for 04162752 does not list the engine models this pump serves. The reliable check is the OE number itself: match 04162752 against the number on your old pump or in the parts book, then compare the dimensions in the spec table below.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 04162752 |
| Fits brand | DEUTZ |
| TO Shaft head height | 146 |
| Mounting hole position | Aligned to OE mounting points |
| TO Flange height | 126.3 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 2.9 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 9.00 kg |
| Packing | 2 pcs/ctn, 20.00 kg gross |
Logistics data: 2 pcs/ctn, 20.00 kg gross, 59 x 38 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
How do I know 04162752 is the right pump?
Match 04162752 against the OE number on your old pump or in the parts book, then compare the dimensions in the spec table on this page. Our data does not list engine models for this number.
What other part numbers replace 04162752?
04162752 interchanges with 04166383. All of these refer to the same water pump assembly.
How much does the 04162752 water pump weigh?
One pump weighs 9.00 kg net. A full carton of 2 pieces comes to 20.00 kg gross.
What should I check before replacing the 04162752 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.