Deutz water pump
- Interchanges
- 02931703 · 2931061 +2
- Engine
- 22teeth
Photos of the actual unit — the same pump we measure and pack.
04166383 is how DEUTZ lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 04162752.
The OE listing behind 04166383 does not name specific engines. Fitment is settled by the number — if your parts book or old pump shows 04166383, this is the same unit; the spec table below gives the mounting dimensions.
One pump, many part numbers. The full cross list:
| Parameter | Value |
|---|---|
| OE number | 04166383 |
| Fits brand | DEUTZ |
| TO Shaft head height | 146 |
| Mounting hole position | Aligned to OE mounting points |
| TO Flange height | 126.3 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 2.9 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 9.00 kg |
| Packing | 2 pcs/ctn, 20.00 kg gross |
Packing runs 2 pumps per carton, 20.00 kg gross weight, carton size 59 x 38 x 21 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
How do I know 04166383 is the right pump?
Match 04166383 against the OE number on your old pump or in the parts book, then compare the dimensions in the spec table on this page. Our data does not list engine models for this number.
What other part numbers replace 04166383?
04166383 interchanges with 04162752. All of these refer to the same water pump assembly.
How much does the 04166383 water pump weigh?
One pump weighs 9.00 kg net. A full carton of 2 pieces comes to 20.00 kg gross.
What should I check before replacing the 04166383 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.