Isuzu water pump
- Interchanges
- 8-94140-341-0 · 8-94140-341-2 +10
- Engine
- 4JB1 M6
Photos of the actual unit — the same pump we measure and pack.
1-13650-179-0 belongs to the Isuzu cooling system parts family. The pump sits on 10PE1 and 10PD1 engines. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 1-13610-789-0, 1-13650-179-1, 1-16350-140-2.
The OE application list reads: 10PE1; 10PD1.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 1-13650-179-0 |
| Fits brand | Isuzu |
| TO Shaft head height | 207 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M10X1.5 |
| TO Flange height | 195 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.5 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 15.90 kg |
| Packing | 1 pcs/ctn, 17.60 kg gross |
One pump, many part numbers. The full cross list:
For shipping estimates, count on 1 pumps per carton (17.60 kg, 31 x 29 x 27 cm).
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 1-13650-179-0 fit?
1-13650-179-0 fits 10PE1 and 10PD1 engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1-13650-179-0?
1-13650-179-0 interchanges with 1-13610-789-0, 1-13650-179-1, 1-16350-140-2. All of these refer to the same water pump assembly.
How much does the 1-13650-179-0 water pump weigh?
One pump weighs 15.90 kg net. A full carton of 1 piece comes to 17.60 kg gross.
What should I check before replacing the 1-13650-179-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.