Isuzu water pump
- Interchanges
- 8-38038845-0 · 8-98038845-0
- Engine
- 4HK1 4 HOLES
Photos of the actual unit — the same pump we measure and pack.
The OE number 1-13650-179-1 identifies a water pump fitted to 10PE1 and 10PD1 engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 15.90 kg; a full carton holds 1.
The OE application list reads: 10PE1; 10PD1.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 1-13650-179-1 |
| Fits brand | Isuzu |
| TO Shaft head height | 207 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M10X1.5 |
| TO Flange height | 195 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.5 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 15.90 kg |
| Packing | 1 pcs/ctn, 17.60 kg gross |
One pump, many part numbers. The full cross list:
Each pump is packed individually; a master carton holds 1 piece at 17.60 kg gross.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 1-13650-179-1 fit?
1-13650-179-1 fits 10PE1 and 10PD1 engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1-13650-179-1?
1-13650-179-1 interchanges with 1-13610-789-0, 1-13650-179-0, 1-16350-140-2. All of these refer to the same water pump assembly.
How much does the 1-13650-179-1 water pump weigh?
One pump weighs 15.90 kg net. A full carton of 1 piece comes to 17.60 kg gross.
What should I check before replacing the 1-13650-179-1 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.