Isuzu water pump
- Interchanges
- 1-13650133-0 · 1-13650133-2 +4
- Engine
- 6HK1
Photos of the actual unit — the same pump we measure and pack.
1-87310835-0 is a Isuzu water pump OE number. Our replacement matches the same mounting and cooling specs and ships with a 8.60 kg net weight (2 pcs per carton). Cross numbers: 1-87310902-0, 1-87310974-0, 8-98042-848-2, 8-98042848-0, 8-98042848-1 and 1 more.
This pump was designed for 6HE1 NEW ROCKY; 6HK1-TC; cast iron.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 1-87310835-0 |
| Fits brand | Isuzu |
| TO Belt pulley height | 142.8 |
| TO Impeller height Ⅱ | 7 |
| TO Shaft head height | 146 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | 4-M10X1.5 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O52X3.5 |
| Net weight | 8.60 kg |
| Packing | 2 pcs/ctn, 19.20 kg gross |
One pump, many part numbers. The full cross list:
Logistics data: 2 pcs/ctn, 19.20 kg gross, 43.5 x 30 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 1-87310835-0 fit?
1-87310835-0 fits 6HE1 NEW ROCKY, 6HK1-TC and other listed engines. It is a Isuzu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1-87310835-0?
1-87310835-0 interchanges with 1-87310902-0, 1-87310974-0, 8-98042-848-2, 8-98042848-0, 8-98042848-1, 8-98042848-2. All of these refer to the same water pump assembly.
How much does the 1-87310835-0 water pump weigh?
One pump weighs 8.60 kg net. A full carton of 2 pieces comes to 19.20 kg gross.
What should I check before replacing the 1-87310835-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.