Yanmar water pump
- Interchanges
- 113-03-0282 · 129900-42050 +4
- Engine
- —
Photos of the actual unit — the same pump we measure and pack.
129907-42000 is how Yanmar lists this water pump. The same pump shows up as 129900-42002, 129907-42051 in other catalogs.
The OE application list reads: 4TNV94; 4TNV98; YM94.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 129907-42000 |
| Fits brand | Yanmar |
| TO Impeller height Ⅱ | 8.8 |
| TO Shaft head height | 115.25 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 97.55 |
| Flange jumping | 0.07 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 1.50 kg |
| Packing | 8 pcs/ctn, 14.00 kg gross |
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
Logistics data: 8 pcs/ctn, 14.00 kg gross, 40.8 x 36 x 38.5 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 129907-42000 fit?
129907-42000 fits 4TNV94, 4TNV98 and other listed engines. It is a Yanmar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 129907-42000?
129907-42000 interchanges with 129900-42002, 129907-42051. All of these refer to the same water pump assembly.
How much does the 129907-42000 water pump weigh?
One pump weighs 1.50 kg net. A full carton of 8 pieces comes to 14.00 kg gross.
What should I check before replacing the 129907-42000 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.