Hino water pump
- Interchanges
- 16100-3731 · 16100-4141
- Engine
- J08E-H
Photos of the actual unit — the same pump we measure and pack.
16100-2371 is how Hino lists this water pump. It serves EH700, H06CT and other listed engines. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 16100-1170, 16100-1171, 16100-1441, 16100-4020.
You will find this pump on EH700; H06CT; EX220-1/2/3.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 16100-2371 |
| Fits brand | Hino |
| TO Shaft head height | 198.6 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M10X1.5 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | M18-GB-T93 |
| Included Component 4 | M18X1.5X15 |
| Net weight | 7.28 kg |
| Packing | 2 pcs/ctn, 16.26 kg gross |
Depending on the catalog you use, the same pump shows up as:
For shipping estimates, count on 2 pumps per carton (16.26 kg, 51.5 x 29 x 26 cm).
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-2371 fit?
16100-2371 fits EH700, H06CT and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-2371?
16100-2371 interchanges with 16100-1170, 16100-1171, 16100-1441, 16100-4020. All of these refer to the same water pump assembly.
How much does the 16100-2371 water pump weigh?
One pump weighs 7.28 kg net. A full carton of 2 pieces comes to 16.26 kg gross.
What should I check before replacing the 16100-2371 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.