Hino water pump
- Interchanges
- 16100-4080 · 16100-78170 +2
- Engine
- N04CHINO 300
Every unit is measured and leak-tested before packing.
16100-2973 is the Hino OE reference for this cooling water pump. One pump weighs 3.60 kg net; match the number against your old pump or parts book before ordering.
Fitment covers H07D SEMI ASSY; 7400cc; 89-92.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 16100-2973 |
| Fits brand | Hino |
| TO Impeller height Ⅱ | 30.9 |
| TO Shaft head height | 112 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M10X1.5 |
| TO Flange height | 95.5 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.60 kg |
| Packing | 4 pcs/ctn, 17.00 kg gross |
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
For shipping estimates, count on 4 pumps per carton (17.00 kg, 46 x 40 x 21 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-2973 fit?
16100-2973 fits H07D SEMI ASSY, 7400cc and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-2973?
16100-2973 interchanges with 16100-2970, 16100-2971, 16100-2972, 16100-2980, 16100-2981, 16100-2982 and 1 more. All of these refer to the same water pump assembly.
How much does the 16100-2973 water pump weigh?
One pump weighs 3.60 kg net. A full carton of 4 pieces comes to 17.00 kg gross.
What should I check before replacing the 16100-2973 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.