Hino water pump
- Interchanges
- 16100-2370 · 16100-2640 +1
- Engine
- H07CH07CT/
Every unit is measured and leak-tested before packing.
The OE number 16100-2983 identifies a water pump fitted to H07D SEMI ASSY, 7400cc and other listed engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 3.60 kg; a full carton holds 4.
You will find this pump on H07D SEMI ASSY; 7400cc; 89-92.
If your engine tag matches any entry above, this pump is the right replacement.
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
| Parameter | Value |
|---|---|
| OE number | 16100-2983 |
| Fits brand | Hino |
| TO Impeller height Ⅱ | 30.9 |
| TO Shaft head height | 112 |
| Mounting hole position | Aligned to OE mounting points |
| Flange thread | 4-M10X1.5 |
| TO Flange height | 95.5 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.60 kg |
| Packing | 4 pcs/ctn, 17.00 kg gross |
Packing runs 4 pumps per carton, 17.00 kg gross weight, carton size 46 x 40 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-2983 fit?
16100-2983 fits H07D SEMI ASSY, 7400cc and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-2983?
16100-2983 interchanges with 16100-2970, 16100-2971, 16100-2972, 16100-2973, 16100-2980, 16100-2981 and 1 more. All of these refer to the same water pump assembly.
How much does the 16100-2983 water pump weigh?
One pump weighs 3.60 kg net. A full carton of 4 pieces comes to 17.00 kg gross.
What should I check before replacing the 16100-2983 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.