Hino water pump
- Interchanges
- 16100-4170 · 16100-E0451 +4
- Engine
- E13C
Photos of the actual unit — the same pump we measure and pack.
Looking for 16100-3464? It is the Hino OE reference for a cooling water pump used on J08C (M10, J07C and other listed engines. The replacement we supply keeps the same fit and pulley dimensions. Net weight 6.40 kg, packed 2 per carton.
Fitment covers J08C (M10; J07C; 5700cc; 8000cc.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 16100-3464 |
| Fits brand | Hino |
| TO Shaft head height | 148.2 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 3-M10X1.5 |
| Flange thread | 4-M10X1.5 |
| TO Flange height | 129.4 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O68X3.5 |
| Net weight | 6.40 kg |
| Packing | 2 pcs/ctn, 14.30 kg gross |
One pump, many part numbers. The full cross list:
Each pump is packed individually; a master carton holds 2 pieces at 14.30 kg gross.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-3464 fit?
16100-3464 fits J08C (M10, J07C and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-3464?
16100-3464 interchanges with 16100-2393, 16100-3462, 16100-3465, 16100-3466, 16100-3467, 16100-3642 and 3 more. All of these refer to the same water pump assembly.
How much does the 16100-3464 water pump weigh?
One pump weighs 6.40 kg net. A full carton of 2 pieces comes to 14.30 kg gross.
What should I check before replacing the 16100-3464 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.