Hino water pump
- Interchanges
- 16100-E0021 · 16100-E0022 +1
- Engine
- J08E
Photos of the actual unit — the same pump we measure and pack.
16100-3465 is the Hino OE reference for this cooling water pump. One pump weighs 6.40 kg net; match the number against your old pump or parts book before ordering.
You will find this pump on J08C (M10; J07C; 5700cc; 8000cc.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 16100-3465 |
| Fits brand | Hino |
| TO Shaft head height | 148.2 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 3-M10X1.5 |
| Flange thread | 4-M10X1.5 |
| TO Flange height | 129.4 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O68X3.5 |
| Net weight | 6.40 kg |
| Packing | 2 pcs/ctn, 14.30 kg gross |
Depending on the catalog you use, the same pump shows up as:
For shipping estimates, count on 2 pumps per carton (14.30 kg, 43.5 x 30 x 21 cm).
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 16100-3465 fit?
16100-3465 fits J08C (M10, J07C and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-3465?
16100-3465 interchanges with 16100-2393, 16100-3462, 16100-3464, 16100-3466, 16100-3467, 16100-3642 and 3 more. All of these refer to the same water pump assembly.
How much does the 16100-3465 water pump weigh?
One pump weighs 6.40 kg net. A full carton of 2 pieces comes to 14.30 kg gross.
What should I check before replacing the 16100-3465 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.