Hino water pump
- Interchanges
- 16100-2342 · 16100-2530 +1
- Engine
- W06D/FC166
Photos of the actual unit — the same pump we measure and pack.
16100-4290 is how Hino lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 15100-E0070, 16100-0070.
The OE application list reads: J08E-EX; J08E; J80CT.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
| Parameter | Value |
|---|---|
| OE number | 16100-4290 |
| Fits brand | Hino |
| TO Shaft head height | 212.3 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 3-M8X1.25 |
| Flange thread | M10X1.5 |
| TO Flange height | 199.1 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O68X3.5 |
| Net weight | 10.70 kg |
| Packing | 2 pcs/ctn, 23.40 kg gross |
Each pump is packed individually; a master carton holds 2 pieces at 23.40 kg gross.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 16100-4290 fit?
16100-4290 fits J08E-EX, J08E and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-4290?
16100-4290 interchanges with 15100-E0070, 16100-0070. All of these refer to the same water pump assembly.
How much does the 16100-4290 water pump weigh?
One pump weighs 10.70 kg net. A full carton of 2 pieces comes to 23.40 kg gross.
What should I check before replacing the 16100-4290 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.