Hino water pump
- Interchanges
- 16100-2393 · 16100-3462 +7
- Engine
- J08C (M10)
Photos of the actual unit — the same pump we measure and pack.
16100-0070 is the Hino OE reference for this cooling water pump. One pump weighs 10.70 kg net; match the number against your old pump or parts book before ordering.
The OE application list reads: J08E-EX; J08E; J80CT.
Any engine on this list takes our replacement as a straight swap.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 16100-0070 |
| Fits brand | Hino |
| TO Shaft head height | 212.3 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 3-M8X1.25 |
| Flange thread | M10X1.5 |
| TO Flange height | 199.1 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O68X3.5 |
| Net weight | 10.70 kg |
| Packing | 2 pcs/ctn, 23.40 kg gross |
For shipping estimates, count on 2 pumps per carton (23.40 kg, 51.5 x 29 x 26 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 16100-0070 fit?
16100-0070 fits J08E-EX, J08E and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-0070?
16100-0070 interchanges with 15100-E0070, 16100-4290. All of these refer to the same water pump assembly.
How much does the 16100-0070 water pump weigh?
One pump weighs 10.70 kg net. A full carton of 2 pieces comes to 23.40 kg gross.
What should I check before replacing the 16100-0070 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.