Hino water pump
- Interchanges
- 16100-2970 · 16100-2971 +5
- Engine
- H07D SEMI ASSY
Photos of the actual unit — the same pump we measure and pack.
16100-78051 is the Hino OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
This pump was designed for J05C.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 16100-78051 |
| Fits brand | Hino |
| TO Shaft head height | 118.3 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M10X1.5 |
| Flange thread | M8X1.25 |
| TO Flange height | 103.1 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.5 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O58X3.1 |
| Net weight | 4.55 kg |
| Packing | 4 pcs/ctn, 19.90 kg gross |
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
Logistics data: 4 pcs/ctn, 19.90 kg gross, 58 x 44 x 21 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 16100-78051 fit?
16100-78051 fits J05C engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-78051?
16100-78051 interchanges with 16100-E0270. All of these refer to the same water pump assembly.
How much does the 16100-78051 water pump weigh?
One pump weighs 4.55 kg net. A full carton of 4 pieces comes to 19.90 kg gross.
What should I check before replacing the 16100-78051 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.