Caterpillar water pump
- Interchanges
- 10R2776 · 10R3326 +7
- Engine
- C15
Photos of the actual unit — the same pump we measure and pack.
1727767 is the Caterpillar OE reference for this cooling water pump. One pump weighs 12.70 kg net; match the number against your old pump or parts book before ordering.
The OE application list reads: CAT3306T; Paving compactor; CB-534, CP-643; CP-653, CS-643; CS-653; 2W8001.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 1727767 |
| Fits brand | Caterpillar |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-3/8-16UNC |
| TO Gear height | 33.16 |
| TO Impeller height Ⅰ | 0.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 40 |
| Included Component 1 | O135X3.5 |
| Net weight | 12.70 kg |
| Packing | 1 pcs/ctn, 14.00 kg gross |
Each pump is packed individually; a master carton holds 1 piece at 14.00 kg gross.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 1727767 fit?
1727767 fits CAT3306T, Paving compactor and other listed engines. It is a Caterpillar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 1727767?
1727767 interchanges with 8N5929. All of these refer to the same water pump assembly.
How much does the 1727767 water pump weigh?
One pump weighs 12.70 kg net. A full carton of 1 piece comes to 14.00 kg gross.
What should I check before replacing the 1727767 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.