Caterpillar water pump
- Interchanges
- 241-5989 · 3036279 +2
- Engine
- engine 3044c
Photos of the actual unit — the same pump we measure and pack.
376-4216 is the Caterpillar OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
Fitment covers C; For EXCAVATOR E345DL Parts; 349D2.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 376-4216 |
| Fits brand | Caterpillar |
| TO Shaft head height | 44.5 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M10X1.5 |
| TO Gear height | 29.3 |
| TO Impeller height Ⅰ | 8.27 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 35 |
| Included Component 1 | O120X3.1-3 |
| Net weight | 9.22 kg |
| Packing | 2 pcs/ctn, 20.45 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
For shipping estimates, count on 2 pumps per carton (20.45 kg, 51.5 x 29 x 26 cm).
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 376-4216 fit?
376-4216 fits C, For EXCAVATOR E345DL Parts and other listed engines. It is a Caterpillar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 376-4216?
376-4216 interchanges with 228-5812, 293-0818, 352-0205, 3520205, 3520206, CH12887. All of these refer to the same water pump assembly.
How much does the 376-4216 water pump weigh?
One pump weighs 9.22 kg net. A full carton of 2 pieces comes to 20.45 kg gross.
What should I check before replacing the 376-4216 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.