Caterpillar water pump
- Interchanges
- 241-5989 · 3036279 +2
- Engine
- engine 3044c
Photos of the actual unit — the same pump we measure and pack.
352-0205 is a Caterpillar water pump OE number. Our replacement matches the same mounting and cooling specs and ships with a 9.22 kg net weight (2 pcs per carton). Cross numbers: 228-5812, 293-0818, 3520205, 3520206, 376-4216 and 1 more.
This pump was designed for C; For EXCAVATOR E345DL Parts; 349D2.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 352-0205 |
| Fits brand | Caterpillar |
| TO Shaft head height | 44.5 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M10X1.5 |
| TO Gear height | 29.3 |
| TO Impeller height Ⅰ | 8.27 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 35 |
| Included Component 1 | O120X3.1-3 |
| Net weight | 9.22 kg |
| Packing | 2 pcs/ctn, 20.45 kg gross |
Depending on the catalog you use, the same pump shows up as:
Logistics data: 2 pcs/ctn, 20.45 kg gross, 51.5 x 29 x 26 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 352-0205 fit?
352-0205 fits C, For EXCAVATOR E345DL Parts and other listed engines. It is a Caterpillar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 352-0205?
352-0205 interchanges with 228-5812, 293-0818, 3520205, 3520206, 376-4216, CH12887. All of these refer to the same water pump assembly.
How much does the 352-0205 water pump weigh?
One pump weighs 9.22 kg net. A full carton of 2 pieces comes to 20.45 kg gross.
What should I check before replacing the 352-0205 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.