Perkins water pump
- Interchanges
- 145010060 · 145017780 +2
- Engine
- Perkins 14mm pipe
Photos of the actual unit — the same pump we measure and pack.
2030-35 is the Perkins; John Deere OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
Fitment covers TRACTORS; SERIES 20-30-35; 2120,2020,2030 1120,1020,1130,2130; 2035,1035,1635,1750; AR76290.
Match your engine model to the list and the pump will fit without rework.
One pump, many part numbers. The full cross list:
| Parameter | Value |
|---|---|
| OE number | 2030-35 |
| Fits brand | Perkins; John Deere |
| TO Belt pulley height | 139.8 |
| TO Shaft head height | 147.6 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | 4-3/8-16-2A |
| TO Impeller height Ⅰ | 0.5 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 8.30 kg |
| Packing | 2 pcs/ctn, 19.00 kg gross |
For shipping estimates, count on 2 pumps per carton (19.00 kg, 43.5 x 30 x 21 cm).
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 2030-35 fit?
2030-35 fits TRACTORS, SERIES 20-30-35 and other listed engines. It is a Perkins; John Deere application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 2030-35?
2030-35 interchanges with 13243, AR65260, AR87420, AR97708. All of these refer to the same water pump assembly.
How much does the 2030-35 water pump weigh?
One pump weighs 8.30 kg net. A full carton of 2 pieces comes to 19.00 kg gross.
What should I check before replacing the 2030-35 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.