Perkins water pump
- Interchanges
- 145010060 · 154-1816 +2
- Engine
- Perkins 14mm pipe
Photos of the actual unit — the same pump we measure and pack.
13243 belongs to the Perkins; John Deere cooling system parts family. The pump sits on TRACTORS, SERIES 20-30-35 and other listed engines. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 2030-35, AR65260, AR87420, AR97708.
This pump was designed for TRACTORS; SERIES 20-30-35; 2120,2020,2030 1120,1020,1130,2130; 2035,1035,1635,1750; AR76290.
If your engine tag matches any entry above, this pump is the right replacement.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 13243 |
| Fits brand | Perkins; John Deere |
| TO Belt pulley height | 139.8 |
| TO Shaft head height | 147.6 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | 4-3/8-16-2A |
| TO Impeller height Ⅰ | 0.5 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 8.30 kg |
| Packing | 2 pcs/ctn, 19.00 kg gross |
For shipping estimates, count on 2 pumps per carton (19.00 kg, 43.5 x 30 x 21 cm).
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 13243 fit?
13243 fits TRACTORS, SERIES 20-30-35 and other listed engines. It is a Perkins; John Deere application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 13243?
13243 interchanges with 2030-35, AR65260, AR87420, AR97708. All of these refer to the same water pump assembly.
How much does the 13243 water pump weigh?
One pump weighs 8.30 kg net. A full carton of 2 pieces comes to 19.00 kg gross.
What should I check before replacing the 13243 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.