Volvo water pump
- Interchanges
- 20744939 · 21468471 +3
- Engine
- GH11
Photos of the actual unit — the same pump we measure and pack.
21812257 is how Volvo lists this water pump. The same pump shows up as 20921917, 20921947, 20921951, 21618716, 21643286 and 15 more in other catalogs.
This pump was designed for RENAULT TRUCK; VOLVO BUS; VOLVO TRUCK.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 21812257 |
| Fits brand | Volvo |
| TO Flange height | 99.1 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1.3 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 5.60 kg |
| Packing | 2 pcs/ctn, 13.50 kg gross |
Packing runs 2 pumps per carton, 13.50 kg gross weight, carton size 51.5 x 29 x 26 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 21812257 fit?
21812257 fits RENAULT TRUCK, VOLVO BUS and other listed engines. It is a Volvo application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 21812257?
21812257 interchanges with 20921917, 20921947, 20921951, 21618716, 21643286, 21648712 and 14 more. All of these refer to the same water pump assembly.
How much does the 21812257 water pump weigh?
One pump weighs 5.60 kg net. A full carton of 2 pieces comes to 13.50 kg gross.
What should I check before replacing the 21812257 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.