DAF water pump
- Interchanges
- 1949539
- Engine
- EURO6fits:DAFCF,XF106MX-11210-
Photos of the actual unit — the same pump we measure and pack.
The OE number 2184198 identifies a water pump fitted to DAFEuro6MX-11 engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 5.25 kg; a full carton holds 4.
The OE application list reads: DAFEuro6MX-11.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 2184198 |
| Fits brand | DAF |
| TO Belt pulley height | 31 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 40.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 5.25 kg |
| Packing | 4 pcs/ctn, 23.00 kg gross |
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
Logistics data: 4 pcs/ctn, 23.00 kg gross, 58 x 44 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 2184198 fit?
2184198 fits DAFEuro6MX-11 engines. It is a DAF application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 2184198?
2184198 interchanges with 2137201, 2267059. All of these refer to the same water pump assembly.
How much does the 2184198 water pump weigh?
One pump weighs 5.25 kg net. A full carton of 4 pieces comes to 23.00 kg gross.
What should I check before replacing the 2184198 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.