DAF water pump
- Interchanges
- 1639196S1 · 1644762 +7
- Engine
- XFSeries12.9D05
Photos of the actual unit — the same pump we measure and pack.
If your parts book shows 2267059, you need a water pump for DAFEuro6MX-11 engines. Ours is a matching replacement — same mounting holes, same belt pulley height, pressure-tested before packing. Related OE numbers include 2137201, 2184198.
The OE application list reads: DAFEuro6MX-11.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 2267059 |
| Fits brand | DAF |
| TO Belt pulley height | 31 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 40.8 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 5.25 kg |
| Packing | 4 pcs/ctn, 23.00 kg gross |
One pump, many part numbers. The full cross list:
Each pump is packed individually; a master carton holds 4 pieces at 23.00 kg gross.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 2267059 fit?
2267059 fits DAFEuro6MX-11 engines. It is a DAF application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 2267059?
2267059 interchanges with 2137201, 2184198. All of these refer to the same water pump assembly.
How much does the 2267059 water pump weigh?
One pump weighs 5.25 kg net. A full carton of 4 pieces comes to 23.00 kg gross.
What should I check before replacing the 2267059 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.