Nissan water pump
- Interchanges
- 21010-Z5027 · 21010-Z5029 +5
- Engine
- FE6T
Photos of the actual unit — the same pump we measure and pack.
23154956 is the Nissan; Volvo OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
This pump was designed for FE/FL B5/ GH8E; TAD851.
If your engine tag matches any entry above, this pump is the right replacement.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 23154956 |
| Fits brand | Nissan; Volvo |
| TO Shaft head height | 168.75 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 4-M10X1.5 |
| Flange thread | M10X1.5 |
| TO Flange height | 156.35 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1.75 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 15.46 kg |
| Packing | 1 pcs/ctn, 17.20 kg gross |
Each pump is packed individually; a master carton holds 1 piece at 17.20 kg gross.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 23154956 fit?
23154956 fits FE/FL B5/ GH8E and TAD851 engines. It is a Nissan; Volvo application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 23154956?
23154956 interchanges with 21010-9Z01C, 21735265, 22107715, 22951346, 23154958, 23552770 and 6 more. All of these refer to the same water pump assembly.
How much does the 23154956 water pump weigh?
One pump weighs 15.46 kg net. A full carton of 1 piece comes to 17.20 kg gross.
What should I check before replacing the 23154956 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.