Nissan water pump
- Interchanges
- 21010-9Z01C · 22107715 +10
- Engine
- FE/FL B5/ GH8E
Photos of the actual unit — the same pump we measure and pack.
The OE number 85021779 identifies a water pump fitted to FE/FL B5/ GH8E and TAD851 engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 15.46 kg; a full carton holds 1.
This pump was designed for FE/FL B5/ GH8E; TAD851.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 85021779 |
| Fits brand | Nissan; Volvo |
| TO Shaft head height | 168.75 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 4-M10X1.5 |
| Flange thread | M10X1.5 |
| TO Flange height | 156.35 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1.75 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 15.46 kg |
| Packing | 1 pcs/ctn, 17.20 kg gross |
Depending on the catalog you use, the same pump shows up as:
Logistics data: 1 pcs/ctn, 17.20 kg gross, 35 x 30 x 26 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 85021779 fit?
85021779 fits FE/FL B5/ GH8E and TAD851 engines. It is a Nissan; Volvo application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 85021779?
85021779 interchanges with 21010-9Z01C, 21735265, 22107715, 22951346, 23154956, 23154958 and 6 more. All of these refer to the same water pump assembly.
How much does the 85021779 water pump weigh?
One pump weighs 15.46 kg net. A full carton of 1 piece comes to 17.20 kg gross.
What should I check before replacing the 85021779 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.