Caterpillar water pump
- Interchanges
- 10R2776 · 10R3326 +7
- Engine
- C15
Photos of the actual unit — the same pump we measure and pack.
2364413 is a Caterpillar water pump OE number. Our replacement matches the same mounting and cooling specs, fits Cat 3126 and C7 engines, and ships with a 8.54 kg net weight (2 pcs per carton). Cross numbers: 352-2139.
The OE application list reads: Cat 3126; C7.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 2364413 |
| Fits brand | Caterpillar |
| TO Belt pulley height | 134 |
| TO Impeller height Ⅱ | 26.4 |
| TO Shaft head height | 129.3 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 4-M8X1.25 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O52X3.5 |
| Included Component 2 | O19X3.1 |
| Net weight | 8.54 kg |
| Packing | 2 pcs/ctn, 19.50 kg gross |
Depending on the catalog you use, the same pump shows up as:
Logistics data: 2 pcs/ctn, 19.50 kg gross, 51.5 x 29 x 26 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 2364413 fit?
2364413 fits Cat 3126 and C7 engines. It is a Caterpillar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 2364413?
2364413 interchanges with 352-2139. All of these refer to the same water pump assembly.
How much does the 2364413 water pump weigh?
One pump weighs 8.54 kg net. A full carton of 2 pieces comes to 19.50 kg gross.
What should I check before replacing the 2364413 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.