Caterpillar water pump
- Interchanges
- 10R5406 · 200-1212 +4
- Engine
- C9
Photos of the actual unit — the same pump we measure and pack.
Looking for 352-2139? It is the Caterpillar OE reference for a cooling water pump. The replacement we supply keeps the OE fit and pulley dimensions. Net weight 8.54 kg, packed 2 per carton.
You will find this pump on Cat 3126; C7.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 352-2139 |
| Fits brand | Caterpillar |
| TO Belt pulley height | 134 |
| TO Impeller height Ⅱ | 26.4 |
| TO Shaft head height | 129.3 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 4-M8X1.25 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O52X3.5 |
| Included Component 2 | O19X3.1 |
| Net weight | 8.54 kg |
| Packing | 2 pcs/ctn, 19.50 kg gross |
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
For shipping estimates, count on 2 pumps per carton (19.50 kg, 51.5 x 29 x 26 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 352-2139 fit?
352-2139 fits Cat 3126 and C7 engines. It is a Caterpillar application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 352-2139?
352-2139 interchanges with 2364413. All of these refer to the same water pump assembly.
How much does the 352-2139 water pump weigh?
One pump weighs 8.54 kg net. A full carton of 2 pieces comes to 19.50 kg gross.
What should I check before replacing the 352-2139 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.