Mack water pump
- Interchanges
- 25123023 · 316GC1205 +8
- Engine
- 180
Photos of the actual unit — the same pump we measure and pack.
25123023 is the Mack OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
Our data for 25123023 does not list the engine models this pump serves. The reliable check is the OE number itself: match 25123023 against the number on your old pump or in the parts book, then compare the dimensions in the spec table below.
One pump, many part numbers. The full cross list:
| Parameter | Value |
|---|---|
| OE number | 25123023 |
| Fits brand | Mack |
| TO Impeller height Ⅱ | 26 |
| TO Shaft head height | 142.3 |
| Threads on the pump body | 2-7/16-14UNC |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 5.10 kg |
| Packing | 4 pcs/ctn, 23.00 kg gross |
For shipping estimates, count on 4 pumps per carton (23.00 kg, 58 x 44 x 21 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
How do I know 25123023 is the right pump?
Match 25123023 against the OE number on your old pump or in the parts book, then compare the dimensions in the spec table on this page. Our data does not list engine models for this number.
What other part numbers replace 25123023?
25123023 interchanges with 316GC1205, 316GC1211A, 316GC1211AX, 316GC1211B, 316GC1211C, 316GC1211F and 4 more. All of these refer to the same water pump assembly.
How much does the 25123023 water pump weigh?
One pump weighs 5.10 kg net. A full carton of 4 pieces comes to 23.00 kg gross.
What should I check before replacing the 25123023 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send the OE number, your quantity and your destination port — we reply with fitment confirmation and a quote.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.