Mack water pump
- Interchanges
- 316GC284A · 316GC3194 +1
- Engine
- 163mm
Photos of the actual unit — the same pump we measure and pack.
4103-5000814814 belongs to the Mack cooling system parts family. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 25123023, 316GC1205, 316GC1211A, 316GC1211AX, 316GC1211B and 5 more.
Our data for 4103-5000814814 does not list the engine models this pump serves. The reliable check is the OE number itself: match 4103-5000814814 against the number on your old pump or in the parts book, then compare the dimensions in the spec table below.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 4103-5000814814 |
| Fits brand | Mack |
| TO Impeller height Ⅱ | 26 |
| TO Shaft head height | 142.3 |
| Threads on the pump body | 2-7/16-14UNC |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 5.10 kg |
| Packing | 4 pcs/ctn, 23.00 kg gross |
Logistics data: 4 pcs/ctn, 23.00 kg gross, 58 x 44 x 21 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
How do I know 4103-5000814814 is the right pump?
Match 4103-5000814814 against the OE number on your old pump or in the parts book, then compare the dimensions in the spec table on this page. Our data does not list engine models for this number.
What other part numbers replace 4103-5000814814?
4103-5000814814 interchanges with 25123023, 316GC1205, 316GC1211A, 316GC1211AX, 316GC1211B, 316GC1211C and 4 more. All of these refer to the same water pump assembly.
How much does the 4103-5000814814 water pump weigh?
One pump weighs 5.10 kg net. A full carton of 4 pieces comes to 23.00 kg gross.
What should I check before replacing the 4103-5000814814 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.