Massey Ferguson water pump
- Interchanges
- 3637468M1 · 37773799 +5
- Engine
- PERKINS P377/P378
Photos of the actual unit — the same pump we measure and pack.
37773799 is how Massey Ferguson; Perkins lists this water pump. The same pump shows up as 3637468M1, 41312327, 41313218, U5MW0106, U5MW0108 and 2 more in other catalogs.
Fitment covers PERKINS P377/P378.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 37773799 |
| Fits brand | Massey Ferguson; Perkins |
| TO Impeller height Ⅱ | 27.3 |
| TO Shaft head height | 131.2 |
| Mounting hole position | Aligned to OE mounting points |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | M16-GB-T93 |
| Included Component 3 | M16X1.5X12 |
| Net weight | 3.40 kg |
| Packing | 4 pcs/ctn, 15.60 kg gross |
One pump, many part numbers. The full cross list:
Each pump is packed individually; a master carton holds 4 pieces at 15.60 kg gross.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 37773799 fit?
37773799 fits PERKINS P377/P378 engines. It is a Massey Ferguson; Perkins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 37773799?
37773799 interchanges with 3637468M1, 41312327, 41313218, U5MW0106, U5MW0108, U5MW0167 and 1 more. All of these refer to the same water pump assembly.
How much does the 37773799 water pump weigh?
One pump weighs 3.40 kg net. A full carton of 4 pieces comes to 15.60 kg gross.
What should I check before replacing the 37773799 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.