Massey Ferguson water pump
- Interchanges
- 3710285M92 · 3757045M91 +2
- Engine
- ISEKI
Photos of the actual unit — the same pump we measure and pack.
41313218 is the Massey Ferguson; Perkins OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
You will find this pump on PERKINS P377/P378.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 41313218 |
| Fits brand | Massey Ferguson; Perkins |
| TO Impeller height Ⅱ | 27.3 |
| TO Shaft head height | 131.2 |
| Mounting hole position | Aligned to OE mounting points |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | M16-GB-T93 |
| Included Component 3 | M16X1.5X12 |
| Net weight | 3.40 kg |
| Packing | 4 pcs/ctn, 15.60 kg gross |
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
For shipping estimates, count on 4 pumps per carton (15.60 kg, 46 x 40 x 21 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 41313218 fit?
41313218 fits PERKINS P377/P378 engines. It is a Massey Ferguson; Perkins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 41313218?
41313218 interchanges with 3637468M1, 37773799, 41312327, U5MW0106, U5MW0108, U5MW0167 and 1 more. All of these refer to the same water pump assembly.
How much does the 41313218 water pump weigh?
One pump weighs 3.40 kg net. A full carton of 4 pieces comes to 15.60 kg gross.
What should I check before replacing the 41313218 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.