Cummins water pump
- Interchanges
- 3802081 · 6742-01-5578
- Engine
- 6D114T
Photos of the actual unit — the same pump we measure and pack.
The OE number 3803138 identifies a water pump fitted to N88 engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 8.90 kg; a full carton holds 2.
Fitment covers N88.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 3803138 |
| Fits brand | Cummins |
| TO Belt pulley height | 86 |
| TO Impeller height Ⅱ | 29.8 |
| TO Shaft head height | 86 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 3-3/8-16UNC |
| Belt pulley thread | 2-3/8-16UNC |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O32X3.5 |
| Net weight | 8.90 kg |
| Packing | 2 pcs/ctn, 19.80 kg gross |
For shipping estimates, count on 2 pumps per carton (19.80 kg, 59 x 38 x 21 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 3803138 fit?
3803138 fits N88 engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
How much does the 3803138 water pump weigh?
One pump weighs 8.90 kg net. A full carton of 2 pieces comes to 19.80 kg gross.
What should I check before replacing the 3803138 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 3803138 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.