Chevrolet water pump
- Interchanges
- 12528917 · 1252981 +6
- Engine
- —
Photos of the actual unit — the same pump we measure and pack.
52.258.901 is how Chevrolet lists this water pump. The same pump shows up as 94.647.433 in other catalogs.
This pump was designed for GM Opala; Caravan.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 52.258.901 |
| Fits brand | Chevrolet |
| TO Shaft head height | 89.75 |
| Mounting hole position | Aligned to OE mounting points |
| TO Flange height | 86.3 |
| TO Impeller height Ⅰ | 16 |
| Flange Diameter | 58 |
| Impeller Diameter | 88.5 |
| Flange jumping | 0.07 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
One pump, many part numbers. The full cross list:
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 52.258.901 fit?
52.258.901 fits GM Opala and Caravan engines. It is a Chevrolet application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 52.258.901?
52.258.901 interchanges with 94.647.433. All of these refer to the same water pump assembly.
What should I check before replacing the 52.258.901 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 52.258.901 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.