Cummins water pump
- Interchanges
- 5257960 · 5263374 +2
- Engine
- CUMINS 3.8
Photos of the actual unit — the same pump we measure and pack.
5291443 is how Cummins lists this water pump. Our version copies the OE mounting pattern and impeller geometry, so it drops in without modification. Cross-reference: 3964792, 3973116, 4089952, 4309417, 4376358 and 3 more.
This pump was designed for PC350-8; ISC 8.3L; ISL 8.9L.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 5291443 |
| Fits brand | Cummins |
| TO Belt pulley height | 91.4 |
| TO Impeller height Ⅱ | 35.65 |
| TO Shaft head height | 100.6 |
| Mounting hole position | Aligned to OE mounting points |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Pulley Diameter | 88 |
| Included Component 1 | O115X3.5 |
| Net weight | 4.00 kg |
| Packing | 4 pcs/ctn, 18.00 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
For shipping estimates, count on 4 pumps per carton (18.00 kg, 41 x 36 x 19.5 cm).
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 5291443 fit?
5291443 fits PC350-8, ISC 8.3L and other listed engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 5291443?
5291443 interchanges with 3964792, 3973116, 4089952, 4309417, 4376358, 5346203 and 2 more. All of these refer to the same water pump assembly.
How much does the 5291443 water pump weigh?
One pump weighs 4.00 kg net. A full carton of 4 pieces comes to 18.00 kg gross.
What should I check before replacing the 5291443 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.