Isuzu water pump
- Interchanges
- 1-87310902-0 · 1-87310974-0 +4
- Engine
- 6HE1 NEW ROCKY
Photos of the actual unit — the same pump we measure and pack.
5691-0417-0 is the Isuzu; Iseki OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
Fitment covers TS2420 2AA1 2AB1; ISEKI TRACTOR; C240.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 5691-0417-0 |
| Fits brand | Isuzu; Iseki |
| TO Shaft head height | 118 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | ZG3/8-19 |
| Flange thread | 8-M6X1 |
| TO Flange height | 107.5 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 3.80 kg |
| Packing | 4 pcs/ctn, 17.20 kg gross |
Depending on the catalog you use, the same pump shows up as:
Packing runs 4 pumps per carton, 17.20 kg gross weight, carton size 56 x 34 x 19 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 5691-0417-0 fit?
5691-0417-0 fits TS2420 2AA1 2AB1, ISEKI TRACTOR and other listed engines. It is a Isuzu; Iseki application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 5691-0417-0?
5691-0417-0 interchanges with 5681-136-0541-0, 5681-361-0054-0, 5681-361-0076-0, 8-94376832-0. All of these refer to the same water pump assembly.
How much does the 5691-0417-0 water pump weigh?
One pump weighs 3.80 kg net. A full carton of 4 pieces comes to 17.20 kg gross.
What should I check before replacing the 5691-0417-0 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Send us the OE number and your engine model — we confirm fitment before you order.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.